OPTICLIMATE
AIR-COOLED
The air-cooled OptiClimate (OptiClimate Split) operates based on the same principle as the water-cooled design. The only difference is that OptiClimate Split uses air as the coolant instead of water. The OptiClimate Split has an external unit (split unit) at a maximum distance of 30 metres. The split unit is supplied with flexible tubes and fast couplings. Compared to its competitors, the OptiClimate has the unique property of being able to dehumidify even after the desired temperature has been reached.
DEHUMIDIFYING WITH THE PRO3
The OptiClimate PRO3 dehumidifies by continuously finding the right balance between heating and cooling. This enables the dehumidifying function to work even after the desired temperature has been reached. The dehumidifying capacity of the PRO3 is more than sufficient for most applications. This is one-and-a-half to twice as efficient as a building dryer.
INVERTER
Inverter technology ensures even control of the temperature and humidity. The Inverter enables the OptiClimate to continuously adjust the temperature smoothly to the set temperature. The OptiClimate Inverter reacts directly to even the smallest divergence between the set temperature and the current temperature. The Inverter technology prevents the frequent activation and deactivation of the compressor, thereby preventing peaks in the power supply. The OptiClimate Inverter therefore uses less water and power and creates a more even temperature and humidity levels. This technology also uses ‘soft start’ and the compressor speed is gradually increased, preventing a high start-up current. The OptiClimate Inverter has the unique property of being multiphase, meaning that the compressor can be connected to both 230-240V single phase or 400V 3-phase.
WATER-COOLED
AIR-COOLED
WATER COOLER
