DIMLUX EXPERT SERIES MKII
PROFESSIONAL HORTICULTURE LIGHTING SOLUTIONSDIMLUX EXPERT SERIES MKII
PROFESSIONAL HORTICULTURE LIGHTING SOLUTIONS
THE NEW DIMLUX
EXPERT SERIES 1000W MKII
MORE EFFICIENT, MORE FUNCTIONAL,
MORE COMPACT, LIGHTER AND SMARTER!
The MKII upgrade is a more efficient, functional and smarter light fixture. Because the electronics produce less heat loss, the ballast housing is 30% shorter. For example, the Dimlux Expert 1000W MKII has the same length as the Dimlux Expert 600W.
The MKII is standard equipped with the Ultra Optics Hybrid 98 reflector. This reflector ensures both deep light penetration into the crop and a large overlap with other fixtures for better uniformity. The Hybrid reflector is the ideal reflector for most applications.
The Ultra Optics Hybrid 98 reflector is easy to remove, clean, or replace with another type of reflector from the Ultra Optics range to achieve the most efficient configuration for your crop.
The rotary knob has been replaced by a push button with which the status can be set on the new 4 digit display. The status and error codes are now displayed in full instead of with a code.
The Dimlux Expert MKII is equipped with an extra interconnect port (Smartport) that can be used universally. Another ballast can be connected to the Dimlux Expert MKII, but also, for example, a plant temperature camera or humidity sensor.
EASY REMOVABLE ULTRA OPTICS REFLECTOR
Standard equipped with the Ultra Optics Hybrid 98 reflector. This reflector has the highest reflector efficiency in the market with 98% total efficiency, achieved through Miro 98 (99.99% silver) and the SBCS (Single Bounce Clear Sight) principle.
Easy to replace with the Ultra Optics Wide 98 reflector or Ultra Optics Deep 98 reflector. Both reflectors have a 98% efficiency just like the Ultra Optics Hybrid 98
4 DIGIT DISPLAY WITH BOOST FUNCTION
Status and alarms will be displayed on this display. The DimLux Expert Series MKII ballast achieves the highest possible light output due to the overdrive technology (boost) in combination with the 400V control. This makes it possible to get 20% extra growlight form your tubes.
Single push button for setting the power output:
Dimlux Expert 1000W in steps of 500, 600, 700, 800, 900, 1000, 1100 ,1200W
Dimlux Expert 600W in steps of 320, 390, 460, 530, 600, 645, 720W
CLOSED & VERTICAL BALLAST
Closed ballast design, for better protection of the electronics.
Unparalleled and highly efficient ballast driver : 97% efficient, 30% less losses, lighter and 30% more compact than the old Dimlux Expert Series
AN ULTIMATE RANGE OF REFLECTORS TO MEET EVERYONE’S NEEDS
The main goal in designing the Ultra Optics Reflector was to achieve the highest efficiency (light output) possible. It’s designed according to the SBCS (Single Bounce Clear Sight) principle which
ULTRA OPTICS HYBRID 98%
The Hybrid reflector ensures a deep penetration into the plants, while having a larger overlap with other fixtures for better uniformity. The area it illuminates has an aspect ratio of 1.3:1. This reflector is the ideal choice for many scenarios because it combines the best qualities of the Deep and Wide reflectors.
ULTRA OPTICS WIDE 98%
The Wide reflector illuminates a much wider area, which allows for a very short distance between the plants and the reflector. Because of the wider spread, the distance between the crop and reflector for the 1000W fixture is about the same as a regular 600W system. The area it illuminates has an aspect ratio of 2:1, a rectangle.
ULTRA OPTICS DEEP 98%
The Deep reflector allows the light to penetrate very deep into the canopy. Because the Deep reflector directs more light downwards and less to the sides, losses due to walls and walking paths are minimized. The area it illuminates has an aspect ratio of 1:1, square.
CREATE THE OPTIMAL LIGHT SURROUNDING
With the help of the Dimlux light calculator, it is possible to generate a perfect light plan by entering the correct dimensions, the light requirements and the type of fixture.
MORE LIGHT & LESS HEAT DEVELOPMENT
SBCS stands for single bounce clear sight. This means that the light can only hit the reflector 1 time before the light leaves the reflector. Also, the light can’t reflect back into the lamp. Result > more usable light and less heat development.
MORE LIGHT & LESS HEAT DEVELOPMENT
Light that shines on paths or walls is a net loss of light. To compensate for light loss, the reflector is adjustable into 2 positions. An extra ADD-ON reflector can also be placed by which even less light gets lost. Result > less light loss.
MORE LIGHT & LESS HEAT DEVELOPMENT
The convection heat generated by the lamp rises in the reflector. The reflector contains 50mm opening through which the heat can escape. Result > an improved thermoregulation resulting in a better lamp temperature.
MORE LIGHT & LESS HEAT DEVELOPMENT
The heat can escape from the reflector both passively (chimney effect) and actively. By active extraction with a ventilator at the 50mm opening, the room temperature can significantly be reduced. The heat is extracted at the source, which is more efficient than cooling. Result > limited heat development
SPECIFICATIONS MKII SERIES
MKII 600W | MKII 1000W | |
Voltage: | 230V ±10V | 230V ±10V |
Input power @100%: | 621W | 1035W |
Input current @100%: | 2.7A | 4.5A |
Input power @boost | 758W | 1242W |
Input current @boost: | 3.27A | 5.4A |
Input frequency: | 50/60 Hz | 50/60 Hz |
Power factor: | >0.99 | >0.99 |
System PPF | 1408μmol/s @720W | 2528μmol/s |
Ultra High Frequency (UHF): | Yes | Yes |
Controller: | By WiFi – Maxi controller | By WiFi – Maxi controller |
Measurements: | 550mmx275mmx130mm | 625x275x130mm |
(21.6″x10.8″x5.1″) | (26.5”x10.8”x5.1”) | |
Weight: | 5.1kg | 6.3kg |